High Quality Cast Film Extrusion Line - Alumium Plastic Composite Panel Extrusion Line – JWELL
High Quality Cast Film Extrusion Line - Alumium Plastic Composite Panel Extrusion Line – JWELL Detail:
Main Technical Parameter
Model | Products width(mm) | Products thickness(mm) | Design max capacity(kg/h) |
JWS170/35 | 900-1220 | 1-6 | 500-600 |
JWS180/35 | 900-1560 | 1-6 | 700-800 |
SJZ85/170 | 900-2000 | 1-6 | 1000-1200 |
SJZ95/203 | 900-2000 | 1-6 | 1200-1600 |
JWP135/48 | 900-2000 | 2-6 | 1600-2500 |
Note: The specifications are subject to change without prior notice.
Product Description
[Aluminum-plastic panel] is composed of two materials (metal and non-metal) with completely different properties. It not only retains the main characteristics of the original material (metal aluminum, non-metal polyethylene plastic), but also overcomes the shortcomings of the original material. , and then obtained many excellent material properties, such as luxury, bright and colorful decoration, weather resistance, corrosion resistance, impact resistance, fire resistance, moisture resistance, sound insulation, heat insulation, shock resistance; light weight, easy to process and form, easy to carry and install and other characteristics. Therefore, it is widely used in various architectural decorations, such as ceilings, pillars, counters, furniture, telephone booths, elevators, storefronts, billboards, factory walls, etc., and has become one of the three major curtain walls (natural stone, glass curtain wall, metal Curtain wall) is the representative of metal curtain wall. In developed countries, aluminum-plastic panels are also used in the manufacture of buses and train cars, as sound insulation materials for aircraft and ships, and in the design of instrument boxes, etc.
The aluminum-plastic composite panel is composed of multiple layers of materials, the upper and lower layers are high-purity aluminum alloy panels, the middle is a non-toxic low-density polyethylene (PE) core panel, and a protective film is pasted on the front. For outdoor, the front of the aluminum composite panel is coated with fluorocarbon resin (PVDF) coating, and for indoors, the front can be coated with non-fluorocarbon resin.
Application
1. Building exterior walls and curtain wall panels.
2. Refit and refurbish the exterior wall of the old building.
3. Balconies, equipment units, indoor compartments.
4. Panels, sign boards, display stands.
5. Interior wall decorative panels, ceilings,.
6. Industrial materials, body of cold-insulating car.
7. Air conditioners, televisions and other home appliances shell.
Performance
Super peeling degree
The aluminum-plastic composite panel adopts a new process, which improves the most critical technical index of the aluminum-plastic composite panel-peel strength to an excellent state, so that the flatness and weather resistance of the aluminum-plastic composite panel are improved accordingly.
Material is easy to process
The weight of aluminum composite panel is only about 3.5-5.5 kg per square meter, so it can reduce the damage caused by earthquake disaster, and it is easy to handle. Various shapes such as sides, curved shapes and right angles can cooperate with designers to make various changes, and the installation is simple and fast, which reduces the construction cost.
Excellent fire performance
The middle of the aluminum composite panel is a flame retardant material PE plastic core material, and the two sides are extremely difficult to burn aluminum layers. Therefore, it is a safe fireproof material that meets the fire resistance requirements of building regulations.
Impact resistance
It has strong impact resistance, high toughness, no damage to the topcoat by bending, strong impact resistance, and no damage caused by wind and sand in areas with large sandstorms.
Super weather resistance
Due to the use of KYNAR-500-based PVDF fluorocarbon paint, it has unique advantages in weather resistance, no matter in the hot sun or in the cold wind and snow, it will not damage the beautiful appearance, and it can last for 20 years fade.
Uniform coating and various colors
After chemical treatment and the application of Henkel’s film technology, the adhesion between the paint and the aluminum composite panel is uniform, and the colors are various, allowing you to choose more space and show your individuality.
Easy to maintain
Aluminum-plastic panels have been significantly improved in terms of pollution resistance. my country’s urban pollution is relatively serious, and it needs maintenance and cleaning after a few years of use. Because of its good self-cleaning properties, it only needs to use a neutral cleaning agent and water, and the board will be permanently as new after cleaning.
Easy to process
Aluminum composite panel is a good material that is easy to process and form. It is also an excellent product for the pursuit of efficiency and time, which can shorten the construction period and reduce costs. Aluminum-plastic panels can be cut, cut, slotted, band sawed, drilled, countersunk, or cold-formed, cold-folded, cold-rolled, riveted, screwed, or glued.
Aluminum plastic composite panel called ACP in short, composed by aluminum foil and polyethylene, adopting thermocoating technology to produce this new construction material. It is widely used for construction wall, outer door decoration as well as advertising and inner door decoration.
Combining traditional processing technology and practical experience, JWELL develops high speed flame retardant grade ACP board. the maximum output can be 2500kg/h, line speed is 10m/min, width is 900-2000mm, aluminum foil thickness is more than 0.18mm.
Also, we are supplying normal ACP line with output range 500-800kg/h, maxim line speed 5m/min, suitable product width 900-1560mm, aluminum foil thickness 0.06-0.5mm.
Product detail pictures:
Related Product Guide:
With our excellent administration, strong technical capability and strict excellent control method, we carry on to offer our clients with responsible good quality, reasonable costs and great companies. We intention at becoming considered one of your most responsible partners and earning your pleasure for High Quality Cast Film Extrusion Line - Alumium Plastic Composite Panel Extrusion Line – JWELL , The product will supply to all over the world, such as: Pakistan, United States, Bangladesh, Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our products, please don't hesitate to contact us. We will do our best to meet your needs.
By Lindsay from Bulgaria - 2018.09.12 17:18
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Eunice from Argentina - 2017.08.21 14:13